Diamond seals your surfaces and protects them against contamination.
Diamond has been specially developed for use on transparent/semi-transparent surfaces. The Diamond ready-to-use solution can be relied upon for nearly any surface sealing that needs to be done. A clean, grease-free surface is sufficient. This highly developed and balanced product ensures excellent adhesion to the material to be maintained and protected.
The product contains silicon and special water-based maintenance substances.
As a result of treatment with Diamond, the surface becomes even smoother, and dirt has no chance of sticking, as was formerly the case when the surface was rough. The product does not contain alcohol as a carrier substance, nor does it contain fluorosilanes or chemical silicone oils as solvents. Diamond is non-toxic; silicon adheres electrostatically to surfaces, creating a long-lasting protective film.
Diamond 2 in 1
In addition to the functional properties described in detail for Diamond, Diamond 2 in 1 offers an excellent cleaning effect. Thus, surfaces are cleaned and sealed in one step. Costs are saved, and maintenance measures need to be incurred less frequently. Surfaces that formerly had to be maintained and cleaned repeatedly can now be treated at larger intervals thanks to Permanon Diamond 2 in 1. The application procedure is the same as described in detail for Diamond.
Permanon Diamond demonstrates its outstanding properties in the following areas:
- private household with glass
- facility management
- mirror & glass cleaner
- industry and robotics
- automation systems
- restaurants and hotels
- sweet & salt water vessels
- schools and government agencies
- machine & vehicle maintenance
- fitness equipment
- winter gardens
- green houses
- nursing homes
Quick and thorough cleaning made easy
Apply or spray a 5% (1:20) solution onto the surface to be protected. No reaction time is required, also rubbing, buffing, or polishing is not necessary.
Compared to competitor products Permanon is simple in use as it cleans and protects in one step. This gives you brilliant shine and protection. Moreover, follow-up maintenance/cleaning become easier more than 80%.
Dosage:
- First-time application: mix PERMANON (3-5%) with water.
- For shine-renewing a 2-3% solution is sufficient.
Important note:
- After mixing with normal tap water the application solution is stable for about three weeks.
- 1 liter concentrate produces 50 liters of ready-to-use solution at a concentration of 2%.
Concentrate or Ready to use:
Permanon products are highly concentrated and, therefore, must be diluted before use with water. Ready to use products, however, are prefabricated solutions immediately ready for use.
CONCENTRATE 100% pur
All Permanon products are concentrates and are mixable with regular tap water at 3-5%. This means 5% that is 50 ml must be taken from the concentrate and must be diluted with 1.000 ml water. A mixing rate of 3% equals 500ml which produces about 17 liters ready-to-use solution. Important: the solution freshly prepared with tap water is stable for about three weeks.
READY TO USE SOLUTION
In the line of Permanon Diamond we offer the product Ready to use, and, therefore, a prefabricated solution immediately ready for use is available. With 500 ml Ready to use an area of up to 50 sqm can be treated. Important: this application solution has been produced with medicinal water and can therefore be stored for approximately 1 year.
30-day return is to be approved or changed into "return policies"
